ATTACH THE FRAME TO THE CABINET WITH THE SCREWS PROVIDED
( Fig. 3 ).
FIG. 3
INFLAMMABLE MATERIALS MUST BE KEPT AWAY FROM THE APPLIANCE.
NOTE:
WHEN INSTALLING THE MODEL 401THE 60mm HIGH STAINLESS STEEL
VENT SUPPLIED WITH THE MODEL 401 MUST BE INSTALLED UNDER
THE FRONT BOTTOM EDGE OF THE APPLIANCE. THIS IS SCREWED IN
PLACE PRIOR TO INSTALLATION OF THE MODEL 401 APPLIANCE. THIS
VENT MUST BE INSTALLED IN ALL INSTALLATIONS. IF THIS VENT IS
NOT USED, THE INSTALLER IS NOT INSTALLING THIS APPLIANCE AS
PER INSTALLATION INSTRUCTION AND MAY VOID WARRANTIES ETC.
11
