Camec AquaRV, Instructions For Use Manual

Page: 10 / 30

10
1
2
3
4
“DIGITAL” Display
H
The display’s indicator system allows you to be constantly informed of the status of the
washing machine:
1) SPIN SPEED
Once the program has been selected, the maximum spin speed allowed for that
program appears on the display. Pressing the spin button will reduce the speed by
100 rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or
it is possible to omit the spin cycle by pressing the spin button repeatedly.
2) DELAY START LIGHT
This flashes when the delayed start has been activated.
3) “DOOR SECURITY” indicator light
The “Door Security” indicator light is illuminated when the door is fully closed and
the machine is ON. When "Start/Pause" is pressed on the machine with the door
closed the indicator will flash momentarily and then illuminate.
If the door is not closed the indicator will continue to flash.
A special safety setting prevents the door from being opened immediately after the
end of the cycle. Please wait for 2 minutes after the wash cycle has finished and the
“Door Security” light has gone out before opening the door. At the end of the cycle
turn the program selector to "OFF".
4) CYCLE DURATION
When a program is selected the display automatically shows the cycle duration,
which can vary depending on the options selected.
Once the program has started the display will indicate the time remaining to the end
of the wash.
The appliance calculates the time to the end of the selected program based upon a
standard loading. During the cycle, the appliance corrects the time based on the size
and composition of the load.