Camec AquaRV, Instructions For Use Manual

Page: 7 / 30

7
Door handle
Press the finger-bar inside the door handle to open the door.
A
NOTE: When the "Start/Pause" button has been pressed,
the appliance can take few seconds before it starts
operating.
“START/PAUSE” function
Press to start the selected cycle .
Changing the settings after the program has started (PAUSE)
Press and hold the “START/PAUSE” button for about 2 seconds. Flashing lights on the
option buttons & time remaining indicator will indicate that the machine has been paused.
Adjust as required and press the “START/PAUSE” button again to resume washing.
If you wish to add or remove items during the wash cycle, wait 2 minutes until the safety
device unlocks the door.
When you have done this, close the door, press the "Start/Pause” button and the
appliance will continue the cycle where it left off.
CANCELLING A PROGRAM
To cancel a program, turn the selector to the OFF position.
Select a different program.
Re-set the program selector to the “OFF” position.
C
B
Program Start light
This lights up when the START button has been pressed.