www.came.com
www.came.com
CAME S.p.A.
CAME S.p.A.
Via Martiri Della Libertà, 15
Via Cornia, 1/b - 1/c
31030 Dosson di Casier
Dosson di Casier
Treviso
Treviso - Italy
33079 Sesto al Reghena
Sesto al Reghena
Pordenone
Pordenone - Italy
(+39) 0422 4940
(+39) 0422 4941
(+39) 0434 698111
(+39) 0434 698434
Eng
li
sh
- M
an
u
al
:
FA
00
61
3-
EN
v.
1
- 1
1/
2
0
1
6 - © C
A
M
E S
.p.
A
.
Th
e d
ata a
n
d i
nf
or
m
ati
on i
n th
is
m
an
u
al
m
ay b
e c
h
an
g
ed at a
ny ti
m
e a
n
d w
ith
ou
t n
oti
ce
.
Every 400,000 cycles and at least every 6 months:
1.
Check turnstile internal wiring and verify that there are no loose or damaged
cables.
2. Check that there are no abnormal movements and that rotation is smooth by
turning the tripod. Any sudden stopping could be a sign of malfunction.
3. Check that turnstile is securely fi xed to the ground by trying to move it; poor
ground anchoring could lead to danger.
4. Check bolt tightness.
5. Check hydraulic damper adjustment.
6. Check the effi ciency of lock/release levers.
7. Linear rail cleaning/lubrication.
8. Check Roller condition.
Each 1,000,000 cycles, replace:
9. Rollers and electric locks.
Each 3,000,000 cycles, replace:
10. Runner springs.
PROBLEMI
POSSIBLE CAUSES
CHECKS AND REMEDIES
The turnstile remains
unlocked in both directions
• No power
• Emergency or release button pressed
• Electric locks out of order
• Check for mains power
• Reset the emergency button or release button
• Contact service
The turnstile unlocks only in
one direction
• One of the electric locks is out of order
• The spring of one of the electric locks has come unlatched
• Button 2-3 or 2-4 is pressed
• Contact service
• Restore the spring
• Check the contact
The turnstile remains locked
• The person going through leaned on the arm too early.
• Both electric locks remain energised
• Stop button active
• Ask the person to stand free of the arm and try again
• Contact service
• Check the release command validity
The tripod fails to slowdown
at end run
• The hydraulic damper is out of order
• • Adjust the hydraulic damper
The turnstile remains
unlocked after passing
through it
• The entrance/exit sensor is positioned incorrectly
• The entrance/exit sensor is out of order
• Check the position of the entrance/exit sensor
• Contact service
Err-A
• Reports access denied for "user already in the area".
• Issue an exit command
Full
• Reports access denied due to maximum number of accesses
allowed reached.
• Implement the F-8 function
Err
• Reports that the user is attempting to store a card (F-2) already in
the memory.
• Use a card that has not been stored
TROUBLESHOOTING
DISMANTLING AND DISPOSAL
☞
CAME CANCELLI AUTOMATICI S.p.A. implements an EN ISO 14001-certified and compliant Environmental Management System at its plants, to ensure environmental
protection.
Please continue our efforts to protect the environment, something that CAME considers to be one of the foundations in developing its business and market strategies, simply
by observing brief recommendations as regards disposal:
DISPOSAL OF PACKAGING
Packaging components (cardboard, plastic, etc.) can be disposed of together with normal household waste without any difficulty, by simply separating the different types of
waste and recycling them.
Before proceeding, it is always advisable to check specific regulations in force in the place of installation.
DISPOSE OF PROPERLY!
DISPOSAL OF THE PRODUCT
Our products are made with different materials. Most of them (aluminium, plastic, iron, electrical cables) can be disposed of together with normal household waste. They can
be recycled if collected, sorted and sent to authorised centres.
Other components (control boards, transmitter batteries, etc.), on the other hand, may contain pollutants.
They should therefore be removed and handed over to companies authorised to recover and recycle them.
Before proceeding, it is always advisable to check specific regulations in force in the place of disposal.
DISPOSE OF PROPERLY!
REFERENCE REGULATIONS
The product complies to the reference regulations in effect.