F - 1
F - 2
X2
12 :30.
----
Sto
F - 1
p.
1
3
13
- M
an
u
al
:
F
A
0
0
6
1
3
-E
N
FA
0
0
6
1
3
-E
N
v.
1
1
- 1
1/
2
0
1
6 - © C
A
M
E S
.p.
A
. T
h
e d
ata a
n
d i
nf
or
m
ati
on i
n th
is
m
an
u
al
m
ay b
e c
h
an
g
ed at a
ny ti
m
e a
n
d w
ith
ou
t n
oti
ce
.
Creating a Master card
☞
A flashing display dot means that the Master card has not been created yet. Press ENTER 2 times.
The LED of the transponder “SENSOR 1” flashes RED and lines appear on the display.
Move a card designated as MASTER near the flashing transponder within 10 seconds and leave it for a few seconds until the display reads Sto (Storage).
should you lose the MASTER card, follow the same procedure as in point 1 with a new card.
Menu navigation and programming using the Master card
⚠
Always create the Master card first and keep it to navigate the functions menu..
Enter the functions menu by bringing the Master card near the transponder (SENSOR 1). The display reads F-1. The transponder will remain green during the
programming phase.
Carrying out this procedure is similar to pressing "ENTER" on the keyboard
.
Swiping the Master card from right to left, or vice-versa, allows the user to set the functions without opening the turnstile.
(SENSOR 1)
Transponder used to confirm the functions and settings (ENTER).
(SENSOR 2)
Transponder used to modify, increase or decrease a value.
Green LED
Green LED
Green LED
THE RED LED flashes
THE RED LED flashes
Programming via transponder (MASTER card)
The MASTER card (F-1) must be created using the keyboard in order to program the functions using the transponder.
SENSOR 1
SENSOR 1
SENSOR 2
SENSOR 1
SENSOR 2
SENSOR 2
SENSOR 1