1
2
3
⚠
p.
1
5
15
- M
an
u
al
:
F
A
0
0
6
1
3
-E
N
FA
0
0
6
1
3
-E
N
v.
1
1
- 1
1/
2
0
1
6 - © C
A
M
E S
.p.
A
. T
h
e d
ata a
n
d i
nf
or
m
ati
on i
n th
is
m
an
u
al
m
ay b
e c
h
an
g
ed at a
ny ti
m
e a
n
d w
ith
ou
t n
oti
ce
.
Proper adjustment of the hydraulic damper is a necessary condition for the correct turnstile operation with reduction of mechanical stress on the system.
⚠
Both the working temperature and duty cycle must be taken into account to properly adjust the hydraulic damper.
⚠
Remove line voltage during installation and make sure that the tripod moves freely.
❶
Loosen the bolt.
❷
Simulate use by acting on the tripod and, while screwing/unscrewing the damper, adjust braking force of the rotating mechanism: it must smoothly reach
the end run during slowdown.
⚠
Make sure that slowdown is as expected for both clockwise and anti-clockwise rotation.
❸
Lock the hydraulic damper by tightening the bolt.
ADJUSTING THE HYDRAULIC DAMPER
MAINTENANCE
Before any maintenance, disconnect line voltage to prevent any possible dangerous situations that can be caused by accidental movement.
For proper maintenance of steel, please consult the manual 119RW48 on steel cleaning operations.
Periodic maintenance
Model
Operating Limits
MCBF
PST001
Maximum number of daily cycles: 15,000
Maximum number of cycles per minute: 12 (1 cycle every 5 seconds)
1,500,000
PST002
PST003
PST004
FINAL OPERATIONS
⚠
Make sure that the hydraulic damper is correctly adjusted (see specific chapter).
⚠
Place the display cable out of the way of internal moving parts to avoid it from getting caught.
Place the cover back on and engage the lock with the key.