SX
N
M
DX
page
9
- Manual
FA01260-IT
- 10/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice
. - T
ranslation of the original instructions
Boom installation
Fasten the boom attacher and distancer onto the motor shaft using four UNI 5933 M12X20 screws.
Fasten the boom to the attacher using the bolts supplied with the boom.
Change of the boom opening direction
⚠
Caution!
The barrier is set up for installing on the left.
When installing on the right, invert the boom's opening direction, as follows:
- remove the spring connection from the transmission arm
;
- release the gearmotor by using the key;
- - rotate the transmission arm
;
- lock the motor again;
- fasten the rod to the arm's opposite hole
;
- invert motor phase M with N
.
Right
Left
Summary of Contents for I1PB0500026
Page 2: ...4 4...
