page
8
- Manual
FA01260-IT
- 10/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice
. - T
ranslation of the original instructions
Fastening the barrier
The cabinet should be installed with the inspection hatch on the most accessible side to make any adjusting easier.
Place the cabinet onto the anchoring plate and fasten it using nuts and washers.
Preparing the barrier
Remove the cover screws, fit the key into the lock and turn it clockwise
.
Lift the dome
and remove the inspection hatch
.
Fill the hole with earth around the concrete block.
Remove the nut and washer from the bolts
Fit the electric cables into the tubes so that they come out about 600 mm.
Summary of Contents for I1PB0500026
Page 2: ...4 4...
