CAME EMEGA, Installation Manual

Page: 59 / 128

H
Y
X
X
X
Page
2
7
27 - Manual
FA
01
19
5-
EN
- 0
6
/2
01
8 - © CAME S
.p.
A
.. - The contents of this manual may change, at any time, and without notice. - Translated original in
structions
H (mm) X (mm) Y (mm) ARM
2400 190 200 E783
2400 - 2700 190 200 E783 + E784
> 2700 500 0 E783 + E784
Canopy or spring-balanced overhead door with minimum 25 mm bearing guide and gearmotor applied
centrally
Apply the guide-base (001E001) and the anchoring bracket as shown in figure 1 according to the dimensions, see table.
Assemble the articulated arms (001E783) as shown in figure 2 to proceed with the installation of the gearmotor, returns and
the transmission tube using the procedure described in the previous paragraphs.
Guide base
Hole "A"
Door arm axis
Anchoring bracket
5 mm min.
Upper arm
Counterweight casing
Bearing guide
25 mm min.
Arm
Return
Fig. 1
Fig. 2
N.B. check that, while the door is opening and closing, the angle X formed by the arms does not exceed 130°. Other-
wise, position the upper arm in the most suitable hole on the connection bracket.