CAME EMEGA, Installation Manual

Page: 61 / 128

H
H /2
H /2
E 7 8 5 A
110
750
E 785 A
H
D
Page
2
9
29 - Manual
FA
01
19
5-
EN
- 0
6
/2
01
8 - © CAME S
.p.
A
.. - The contents of this manual may change, at any time, and without notice. - Translated original in
structions
H (mm) ARM
2000 - 2700 E785A + E787A
Hole "A"
Motor axis
Guide base
Counterweight
Non-protruding counter-weighted overhead garage-door with gearmotor fitted centrally.
Spring-loaded fully-retracting protruding overhead garage-door with gearmotor fitted laterally.
H (mm) ARM
2000 - 2400 E785A
2400 - 2700 E785A + E787A
Guide
base
Motor axis =
hole "A"
Connection bar*
* To be welded if the door is too flexible.
Apply the guide-base (001E001) and the
anchoring bracket as shown in the figure
according to the dimensions, see table.
Assemble the straight telescopic arms
(001E785A) and proceed with the
installation of the gearmotor, returns
and the transmission tube following
the procedure set out in the previous
paragraphs.
Apply the guide-base (001E001)
and the anchoring bracket as
shown in the figure according to the
dimensions, see table.
Assemble the straight telescopic
arms (001E785A) and proceed with
the installation of the gearmotor,
returns and the transmission tube
following the procedure set out in
the previous paragraphs.