CAME A 3024 N, Installation Manual

Page: 20 / 48

p.
8
- M
anu
al
FA
01
16
3-
EN
- 0
5
/2
0
18 - © C
A
M
E S
.p
.A
. - T
ransla
te
d o
riginal inst
ru
ct
io
ns
Securing and adjusting the endstop
Spindle
Endless screw
Closing-speed brake microswitch
Microswitch bar
Spindle
Cable support
Microswitch actuating sled
Stop brake microswitch
OPENING PHASE (deceleration if set up on the control panel):
Release the gearmotor and swing the gate-leaf to the fully open position you desire, then, unscrew the securing screws on the opening stop
micro-switches assembly.
Slide the micro-switch assembly along the micro-switch bar until it is completely passing the contact point on the micro-switch activating sled (as
shown in part B.).
Secure the micro-switch assembly using the respective screws.
OPENING PHASE: (stop)
Release the gearmotor and swing the gate-leaf to the fully open
position you desire, then, unscrew the securing screws on the opening
stop micro-switches assembly.
Slide the micro-switch assembly along the micro-switch bar until it is
inserted by contact on the micro-switch activating sled
Secure the micro-switch assembly using the respective screws.
CLOSING PHASE (deceleration)
Swing the gate until fully closed.
Unscrew the securing screws on the closing decelaration micro-switch
assembly.
Slide the micro-switch assembly along the micro-switch bar until it is
completely passing the contact point on the micro-switch activating sled
(as shown in part A.)
Secure the micro-switch assembly using the respective screws.
Part. A.
Excluding the micro-
switch contact (fully
closed gate-leaf)
Micro-switch
insertion area
Part. B.
Excluding the micro-switch contact (fully
open gate-leaf)
Deceleration micro-switch
insertion area