3
(B) Front and Internal View
1. Solar Powered Door Thermometer
(Factory Set at Celsius or Fahrenheit)
2. Cabinet Doors
3. Door Latches
4. Vent Cap, dual position (One per Door)
5. Menu Clip (One per Door)
6. Adjustable Slide Rails
7. Louvers
8. Uprights for Slide Rails
9. Cabinet Cavity
(Single cavity for both low and tall units)
III. Features at a Glance (continued)
(C) Camtherm with Security Package
LOW PROFILE
Hot Only
CMBH1826SP
Hot / Cold
CMBHC1826SP
TALL PROFILE
Hot Only
CMBH1826TSP
Hot / Cold
CMBHC1826TSP
Locking, stainless steel door latch.
Factory assembled for maximum
security.
Rail assembly attached to
unit with security screws.
One-piece, welded rail and upright
assembly available upon request.
(D) Control Panels
Hot Only Models:
(Located on the upper section of the TE unit, mounted to the back of the cabinet)
•
On/Off
Power Switch
•
Temperature set-point digital controller
•
Hot temperature is factory pre-set to 165˚F / 73,9˚C
(Hot Range: 80˚F to 170˚F / 26,7˚C to 76,7˚C)
Cold Temperature Control
Hot Temperature Control
Mode Switch for
Cold or Hot
Digital LED Display
shows set point and
temperature
Digital LED Display shows
set point and temperature
On
/
Off Switch
Set Key
Value Increase
Value Decrease
On
/
Off Switch
Hot & Cold Models:
(Located on the upper section of the TE unit, mounted to the back of the cabinet)
•
On/Off
Power Switch
•
Mode
Switch (for selecting hot or cold operation modes)
•
Temperature set-point digital controller
•
Cold temperature is factory pre-set to 34˚F. / 1,1˚C
(Cold Range: 32.1˚F to 40˚F / 0,05˚C to 4,4˚C)
•
Hot temperature is factory pre-set to 165˚F / 73,9˚C
(Hot Range: 80˚F to 170˚F / 26,7˚C to 76,7˚C)
