page
7
of
17
EtherSync User Guide
document revision 1.01
Note
The initial password is used for access to
Webmin and LiveViewer.
To change the password for Webmin go
to Webmin Users and select the user for
which you wish to change the password
i.e admin. In this section the password
can now be changed.
If you which to leave the password blank,
set the password with the password box
empty, do not select
‘No password
accepted’.
The password for LiveViewer will stay the
same, i.e the initial password located on
the back of the EtherSync.
5)
From the left box select ‘Networking’
then ‘Connection Manager’.
6)
From here you can set up the address/
DHCP for network interfaces or select
the Ethernet Port by selecting ‘Network
Interface’ and giv
e the EtherSync a host
name by selecting ‘Hostname and DNS
Client’.
Note
To select a Static IP change from DHCP to
Static and enter the appropriate IPv4/
netmask/ gateway fields.
Summary of Contents for EtherSync
Page 1: ......
