page
11
of
17
EtherSync User Guide
document revision 1.01
3)
Click the ‘ ’ sign next to the
desired
EtherSync to display the devices connected
to the EtherSync.
Note
It is possible to rename an EtherSync by
right clicking on the desired EtherSync and
selecting ‘R
ename
’
. However, this only
renames the EtherSync on the connector
application, not its host name as used on the
Webmin Interface.
4)
To use the device on the client computer,
right click on the device and select ‘Use’ or
any of the ‘Auto
-
Use…’ options.
Auto-Use Device - Automatically uses the
device no matter what port it is connected
to.
Auto-Use Port - Automatically uses the port
no matter what device is connected to it.
Auto-Use Device/Port - Automatically uses
the port no matter what device is connected
and automatically uses the device no matter
what port it is connected to.
Note
Auto-Use Port should be chosen when using Apple
Configurator
All devices connected to an EtherSync can be
automatically used by right clicking on the desired
EtherSync and selecting ‘Auto
-
Use Devices on Hub’
.
5)
The devices will now appear on the
client computer as if they are connected
directly.
By default EtherSyncs will appear on the Connector Software as EtherSyncXXYYZZ, where XXYYZZ are the
last 6 digits of the Mac Address which can be found on the bottom of the EtherSync.
The ‘Custom Even
t
Handler…’ option in the context menu of a device should only be used with the explicit
direction of Cambrionix Technical Support. It allows for advanced control of devices which should not
normally be needed.
Many smart devices, released in recent years, such as tablets and phones can take advantage of
EtherSync’s
built in ChaSync feature which enables the devices to charge while syncing.
To synchronise devices, open the desired synchronising application and use it as if the devices are
connected to the client computer
[
It is recommended that you select “Auto
-
Use Port” when you are syncing
Auto-Use
Device
EtherSyncfda01c
EtherSyncfda01c
USB Hubs
USB Flash Drive
Andriod Phone
Use
Auto-Use Port
Auto-Use Device/Port
Custom Event Handler…
Rename…
Properties
USB Hubs
Summary of Contents for EtherSync
Page 1: ......
