page
12
of
17
EtherSync User Guide
document revision 1.01
iOS devices].
Once synchronisation is complete follow normal safety measures by ejecting the device first
and then select stop using on the Connector software before unplugging the device.
If many EtherSyncs are attached to a network it may be hard to find the specific unit. If this is the case the
locator LED can be controlled to make finding the EtherSync easier.
1)
Log onto the Webmin interface as described on page 6.
2)
Go to
Hardware>>LED Control.
To turn
on th
e LED select ‘Locator On’ or
‘Locator Blink’. To turn off the Locator
LED select ‘Locator Off’.
Cambrionix periodically releases updates to the firmware which is used on all current Cambrionix products.
To update EtherSync:
1)
Open the Webmin interface and logon
using the details listed in section 4.1.
2)
Click the
‘System’
tab on the left of
the window, then
‘Cambrionix Linux
opt
ions’
.
3)
To update the
‘Charger Firmware’
select choose file and select the
correct .enfir file. This is most likely
the firmware downloaded with the
Cambrionix Updater app and will be
located where Updater was
installed. Once the file is selected
click the update button.
Summary of Contents for EtherSync
Page 1: ......
