Page 6
Connecting with a Television Using the 3.5mm Audio Cable
- Plug one end of the 3.5mm Audio Cable into the AUX In Connector on the OontZ Angle 3 Pro Soundbar.
- Plug the other end of that 3.5mm Audio Cable into the Headphone or Audio-Out Connector on your television.
- Make sure both ends of the cable are fully inserted.
-If your TV does not have a Headphone Connector or Audio-Out Connector but does have Left Right Analog Audio Out you will need a
3.5mm to RCA cable as shown below.
- Press the Source Button until the light is lit Green. The speaker will respond with
‘Aux In Source’
ANALOG
AUDIO OUT
L
R
3.5mm to 3.5mm Audio Cable (included)
OR
3.5mm to RCA audio cable is not included
AUDIO OUT
HEADPHONE
OUT
- or -
DIGITAL
AUDIO OUT
OPTICAL
L
R
OPTICAL IN
AUX IN
DC IN 15V
