Page 27
– Turn the OontZ Angle 3 Pro Soundbar speaker.
– Connect the OontZ Angle 3 Pro Soundbar speaker to your device. This speaker will serve as the
Master Speaker.
– Turn on the
other
supported OontZ speakers. These speakers will be the
Slave Speakers
.
Note:
Only OontZ Angle 3 Pro Soundbar, OontZ Angle 3 ULTRA (4th Gen) and OontZ Angle 3 Pro (2nd Gen) speakers are supported. Other
OontZ speakers and previous generations of the OontZ Angle 3 ULTRA and OontZ Angle 3 Pro are NOT supported.
Connecting a 2nd, 3rd or 4th OontZ Angle 3 Pro Soundbar as Slave Speakers
– The OontZ Angle 3 Pro Soundbar Slave speakers must not be connected to any device, their Source Button Light must be flashing Blue. If
a speaker has a solid Blue Light it is connected to a device and you need to disconnect it by pressing and holding down the Mulit-Function
Button for 3 seconds until the Source Button Light begins flashing Blue.
Connecting a 2nd, 3rd or 4th OontZ Angle 3 ULTRA (4th Gen) and OontZ Angle 3 Pro (2nd Gen) as Slave Speakers
– The Slave speakers must not be connected to any device, their Bluetooth Light must be flashing Blue. If a speaker has a solid Blue Light it is
connected to a device and you need to disconnect it by pressing and holding down the Bluetooth Button for 3 seconds until the Bluetooth
Light begins flashing Blue.
Using the OontZ app for Surround Mode
Connecting 2, 3 or 4 supported OontZspeakers together
