Page 29
Using the OontZ app for Surround Mode
Disconnecting and reconnecting the supported OontZ speakers in Surround Mode
To disconnect a Slave speaker in
Surround Mode, press the ‘Slave
Speaker’ Button.
Select a desired speaker from the list of
displayed speakers.
Confirm you want the speaker to exit
Surround Mode.
The box will turn from Blue to Grey, the
speaker will disconnect from the Master
Speaker and the speaker will exit
Surround Mode.
If the Master Speaker is still in Surround
Mode, to reconnect a Slave Speaker just
select the Grey box. The Grey box will
turn Blue. The speaker will enter
Surround Mode and connect with the
Master Speaker.
To disconnect all speakers in Surround Mode, press
the ‘Master Speaker’ Button.
Select the Blue box displayed for the Master Speaker.
Confirm you want to the Master Speaker to exit
Surround Mode.
The box will turn from Blue to Grey, all speakers will
disconnect from the Master Speaker and the Master
Speaker will exit Surround Mode.
Slave Speaker(s) have not been turned off after being
disconnected and are in Surround Mode, the speakers
will automatically reconnect when the Master Speaker
is enabled for Surround Mode.
Slave Speaker(s) have been turned off and back on. The
speakers will need to be reconnected. To reconnect
using the OontZ app refer to the instructions on Page
27 and 28.
