Page 18
– Turn on one of OontZ Angle 3 Pro Soundbar speaker.
– Connect the speaker to your device with Bluetooth, 3.5mm audio cable or Optical Digital Audio Cable. This speaker will serve as the
Master Speaker.
– Turn on the other supported OontZ speakers. These speakers will be the
Slave Speakers
.
– The
Slave Speakers
must not be connected to any device, their Source Button Light must be flashing with a Blue light. If a speaker
has a solid Blue Light it is connected to a device and you need to disconnect it by pressing and holding down the
Multi-Function
Button
for 3 seconds until the Source Button Light begins flashing with a Blue light.
– On the OontZ Angle 3 Pro Soundbar (
Master Speaker)
press and release the
Multi-Function Button .
The Play/Pause Button Light
will turn solid Orange and the speaker will say “Surround Mode Transmit”.
– On the
Slave Speakers
with a flashing Blue Light, press and release the
Multi-Function Button .
The Play/Pause Button Light will
flash Orange and the speaker will say “Surround Mode Receive”.
– After a few seconds each speaker will connect with the
Master Speaker
and will have the Play/Pause Button Light lit with a solid Orange
light.
– Use the buttons on the
Master Speaker
for volume, play/pause, track back, and track forward. These controls are disabled on
the other speakers when connected together.
– Use the
Master Speaker
for connecting to different audio devices via Bluetooth, AUX IN or Optical IN. The Bluetooth and AUX IN
are disabled on the other speakers when connected together.
OontZ Angle 3 Pro Soundbar Speakers connected in Surround Mode
OontZ Angle 3 Pro Soundbar
Master Speaker
OontZ Angle 3 Pro (2nd Gen)
Slave Speaker(s)
Lit Blue if
connected the
OontZ App
Lit Orange
Light
OFF
Lit Orange
Light
OFF
Lit Blue,
Green,
or Red
Light
OFF
Light
lit solid
Orange
OontZ Angle 3 ULTRA (4th Gen)
Slave Speaker(s)
