Page 5
Connecting with a Television Using the Digital Audio Optical Cable
- Plug the longer end of the Digital Audio Optical Cable into the
Optical In Connector
on the OontZ Angle 3 Pro Soundbar as shown
below.
- Plug the shorter end of the Digital Audio Optical Cable into the
Optical - Digital Audio Out
on your TV as shown below.
- Make sure both ends of the cable are fully inserted.
- Press the Source Button until the light is lit Red. The speaker will respond with ‘Optical In’
We recommend to connect to your TV using the Digital Audio Optical Out Connector. If the TV does not have a Digital Audio Optical
Out Connector, use the 3.5mm Audio Connection as described on Page 6.
Digital Audio Optical Cable is included
ANALOG
AUDIO OUT
L
R
DIGITAL
AUDIO OUT
OPTICAL
AUDIO
OUT
OPTICAL IN
AUX IN
DC IN 15V
