Page 3-1
Chapter 3: System planning
This chapter provides information to help the user to plan a PMP/PTP 450 Platform link.
The following topics are described in this chapter:
Typical deployment
on page
3-2
contains diagrams illustrating typical PMP/PTP 450 Platform site
deployments.
Site planning
on page
3-7
describes factors to be considered when planning the proposed link end
sites, including grounding, lightning protection and equipment location.
Radio Frequency planning
on page
3-17
describes how to plan PMP/PTP 450 Platform links to
conform to the regulatory restrictions that apply in the country of operation.
Link planning
on page
3-28
describes factors to be taken into account when planning links, such as
range, path loss and throughput.
Planning for connectorized units
on page
3-31
describes factors to be taken into account when
planning to use connectorized ODUs with external antennas in PMP/PTP 450 Platform links.
Data network planning
on page
3-33
describes factors to be considered when planning PMP/PTP 450
Platform data networks.
Network management planning
on page
3-41
describes how to plan for PMP/PTP 450 Platform links
to be managed remotely using SNMP.
Security planning
on page
3-42
describes how to plan for PMP/PTP 450 Platform links to operate in
secure mode.
Remote AP Deployment on page
3-52
describes how to deploy Remote AP.
Summary of Contents for PMP 450 AP
