Chapter 6: RFU-C Configurations
Antenna Connection
phn-4026 003v000
Page 6-15
2
Mount the two O-Rings supplied with the Coupler kit, according to the Coupler kit instructions.
3
Mount the RFU-C on the body of the coupler using the four M8 captive screws and washers that are supplied,
assembled, in the RFU-C, and tighten the screws.
4
Place the O-Ring in the flexible waveguide flange groove.
5
Mount the flexible waveguide on the coupler, and tighten the screws and washers.
Note
For 6 GHz, only4 screws should be used, as shown in the pictures below..
6
Place the O-Ring in the other end of the flexible waveguide flange groove.
7
Mount the flexible waveguide on the antenna, and tighten the screws and washers.
