Cambium Networks PTP 550 Series User Manual Download Page 109

Page: 109 / 249

Chapter 4: Legal and regulatory information

Cambium Networks end user license agreement

Page 4-35

* 2 of the License, or (at your option) any later version.

* Authors: Alexey Kuznetsov, <[email protected]>

iptables

* Author: [email protected] and [email protected]

* Paul 'Rusty' Russell <[email protected]>

* Marc Boucher <[email protected]>

* James Morris <[email protected]>

* Harald Welte <[email protected]>

* Jozsef Kadlecsik <[email protected]>

* Based on the ipchains code by Paul Russell and Michael Neuling

* iptables -- IP firewall administration for kernels with

* firewall table (aimed for the 2.3 kernels)

* See the accompanying manual page iptables(8) for information

* about proper usage of this program.

* This program is free software; you can redistribute it and/or modify

* it under the terms of the GNU General Public License as published by

* the Free Software Foundation; either version 2 of the License, or

* (at your option) any later version.

* This program is distributed in the hope that it will be useful,

* but WITHOUT ANY WARRANTY; without even the implied warranty of

* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

See the

* GNU General Public License for more details.

* You should have received a copy of the GNU General Public License

* along with this program; if not, write to the Free Software

* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

Permission to use, copy, modify, and/or distribute this software for any

purpose with or without fee is hereby granted, provided that the above

THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS

ALL WARRANTIES

WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED

WARRANTIES OF

MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR

BE LIABLE FOR

ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR

ANY DAMAGES

WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,

WHETHER IN AN

ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,

ARISING OUT OF

Summary of Contents for PTP 550 Series


























































































































































































































































Search results

Summary of Contents for PTP 550 Series

Reviews:

Related manuals for PTP 550 Series

Brands by name

Popular brands

Cambium Networks PTP 550 Series, User Manual

Search results

Summary of Contents for PTP 550 Series

Reviews:

Related manuals for PTP 550 Series

Brands by name

Popular brands