Cambium Networks PTP 550 Series User Manual Download Page 106

Page: 106 / 249

Chapter 4: Legal and regulatory information

Cambium Networks end user license agreement

Page 4-32

This software is not subject to any export provision of the United States

Department of Commerce, and may be exported to any country or planet.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions

are met:

1. Redistributions of source code must retain the above copyright

notice immediately at the beginning of the file, without modification,

this list of conditions, and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS

``AS IS'' AND

ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR

CONTRIBUTORS BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS

OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION)

HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT

LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)

ARISING IN ANY WAY

OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE

POSSIBILITY OF

SUCH DAMAGE.

glib/glib2

GNU LIBRARY GENERAL PUBLIC LICENSE

Version 2, June 1991

59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Everyone is permitted to copy and distribute verbatim copies

of this license document, but changing it is not allowed.

[This is the first released version of the library GPL. It is

numbered 2 because it goes with version 2 of the ordinary GPL.]

haproxy

HAPROXY's license - 2006/06/15

Historically, haproxy has been covered by GPL version 2. However, an issue

appeared in GPL which will prevent external non-GPL code from being built

using the headers provided with haproxy. My long-term goal is to build a core

system able to load external modules to support specific application protocols.

Since some protocols are found in rare environments (finance, industry, ...),

some of them might be accessible only after signing an NDA. Enforcing GPL

such modules would only prevent them from ever being implemented, while

not

providing anything useful to ordinary users.

Summary of Contents for PTP 550 Series


























































































































































































































































Search results

Summary of Contents for PTP 550 Series

Reviews:

Related manuals for PTP 550 Series

Brands by name

Popular brands

Cambium Networks PTP 550 Series, User Manual

Search results

Summary of Contents for PTP 550 Series

Reviews:

Related manuals for PTP 550 Series

Brands by name

Popular brands