Chapter 6: Configuration and alignment
Using the menu options
Page 6-45
Attribute
Meaning
MCS Downlink
(Master Mode
only)
Current MCS at which the Slave is operating on the downlink.
Add As Preferred
(Slave Mode
only)
Click the Add
button to add the Master to the Preferred Masters
List under Configuration>Radio.
SSID
(Slave Mode
only)
The SSID of the visible Master.
MAC Address
(Slave Mode
only)
The MAC address of the visible Master.
Frequency
Carrier (MHz)
(Slave Mode
only)
The current operating frequency of the visible Master.
Channel
Bandwidth (MHz)
(Slave Mode
only)
The current operating channel bandwidth of the visible Master.
RSSI (dBm)
(Slave Mode
only)
The current measured Received Signal Strength Indicator at the Master.
SNR (dB)
(Slave Mode
only)
The current measured Signal-to-Noise Ratio of the Slave to Master link.
Registration
State
(Slave Mode
only)
The indication of the result of the Slave device network entry attempt:
Successful: Slave registration is successful
Failed: Out of Range: The Slave is out of the Master’s configured
maximum range (Max Range parameter)
Failed: Capacity limit reached at Master: The Master is no longer
allowing Slave network entry due to capacity reached
Failed: No Allocation on Master: The Slave to Master handshaking
failed due to a misconfigured pre-shared key between the Slave and
Master
Failed: SW Version Incompatibility: The version of software resident on
the Master is older than the software version on the Slave
Failed: PTP Mode: ACL Policy: The Master is configured with PTP
Access set to MAC Limited and the Slave’s MAC address is not
configured in the Master’s PTP MAC Address field
