Cambium Networks ePMP 1000, User Manual

Page: 250 / 478

CAMBIUM NETWORKS
026v003
250
Attribute Meaning
Uplink MCS Modulation and Coding Scheme – indicates the modulation
mode used for the radio uplink, based on radio conditions
(MCS 1-7, 9-15).
Downlink MCS Modulation and Coding Scheme – indicates the modulation
mode used for the radio downlink, based on radio conditions
(MCS 1-7, 9-15).
Power Control Mode from AP Open Loop: In this mode, the SM will not receive any power
change information in the Group Poll Frame. SM calculates the
UL transmit power based on path loss calculations only.
Closed Loop: In closed loop UL power control, Subscriber
Module will get the AP actual transmit power of beacon frame
and SM Target Received Power Level in the beacon. Based on
these two values, SM calculates the path loss. Based on path
loss and TRL values it calculates it’s transmit power such that
the signal from SM arrives at AP at the configured target level.
Path loss calculation will be updated by SM every time there is
a change in values of AP actual TX power or TRL in the
Beacon.
Forced Sector Antenna When an ePMP 2000 AP is deployed with a Sector Antenna and
a Smart Antenna, this parameter forces the AP to use only
Sector Antenna for all Subscriber Modules.
Ethernet Interface Up: The radio (LAN) interface is functioning properly.
Down: The radio (LAN) interface has encountered an error and
is not servicing traffic.
Wireless Interface Up: The radio (WAN) interface is functioning properly.
Down: The radio (WAN) interface has encountered an error
and is not servicing traffic.
Country The current code the SM is operating under.
Time since last scan Amount of time elapsed since the last scan was completed by
the SM for available APs.
Registration Status The current registration status of the SM.
Available APs The Available AP list may be referenced to view which APs are
available for SM network entry, and also to view the status of
the current AP to SM radio link.
Add as Preferred
Click the button to add the AP to the Preferred AP List
under Configuration->Radio.
SSID The SSID of the visible AP.
MAC Address The MAC address of the visible AP.