Cambium Networks ePMP 1000, User Manual

Page: 275 / 478

CAMBIUM NETWORKS
026v003
275
SM Wireless Link Test page
Use the SM Wireless Link Test page to conduct a simple test of SM wireless throughput to the AP
to which it is registered. This allows you to determine the throughput that can be expected on a
particular link without having to use external tools.
Figure 80 SM Wireless Link Test page
Table 119 SM Wireless Link Test attributes
Attribute Meaning
Test Setup
AP MAC Address This is not an editable field. It is automatically populated with the
wireless MAC address of the AP to which the SM is registered.
Packet Size Choose the Packet Size to use for the throughput test.
Duration Choose the time duration in seconds to use for the throughput test.
Uplink Antenna
Selection Uplink Antenna Selection specifies the antenna to be used in the uplink
for the wireless link test. The antenna cannot be forced if it is already
configured to Forced Sector Antenna or Forced Smart Antenna in the
AP.
Downlink This field indicates the result of the throughput test on the downlink, in
Mbps.
Uplink This field indicates the result of the throughput test on the uplink, in
Mbps.
Aggregate This field indicates the result of the aggregate throughput on the link, in
Mbps. Displayed only when Downlink/Uplink Ratio is set to 75/25, 50/50
or 30/70.