FibreQuik - Fibre Channel Adapter User Guide
where <device> is as described above.
example:
installp -acd /dev/cd0 all
After installing the driver, see the README file for additional
information
more /usr/lpp/cbxfc/READ_ME
SMIT Driver Installation
The smit path is
Software Installation and Maintenance
Install and Update Software
Install and Update Software by Package Name
For the menu item " INPUT device / directory" use
/dev/cd0,
or the directory where the image file is located. A list should
pop up with the name of the driver. Select it and press enter.
Hardware Installation
Power down the system and install the adapter in a free slot.
The PCI card will work in either 32 or 64-bit PCI card slots.
Make sure that airflow is not blocked by cables. Observe
proper static precautions. Detailed procedures for opening the
case may be found in the
Operator Guide
for the specific
RS/6000 model.
When using copper cable, it is extremely important that the
building wiring present a low impedance ground path to the
frame of the device and the host with which it will
communicate. Additional ground wiring may be added between
the unit and the host to ensure that no electrical noise is
impressed on the interconnecting data cables. Noise due to
copiers or large machinery sharing the electrical circuits is a
common cause of signal integrity problems.
- 4 -
Summary of Contents for AIX
Page 2: ......
