20/28
*The soap solution must be diluted 5 to 10%. Use the soap solution to wash off the dirt, and
wipe off the soap residue with a cloth dipped in clean water.
6. Check the hydraulic circuit
Replace any damaged hydraulic hoses to prevent them from breaking and causing accidents. Always
replace the hydraulic hoses at least every 3 years.
May only be carried out by a qualified service technician and according to the manufacturer’s
instructions
Never try to find leaks or stop a leak by hand. Pressurised fluids can easily penetrate skin and
clothing and cause serious injury.
7. Check the hydraulic oil
In case of dirt in the hydraulic system, it is necessary to change the oil completely.
It is forbidden to change the hydraulic oil yourself.
May only be carried out by a qualified service technician and according to the manufacturer’s
instructions.
8. Check the connections of the hydraulic system
Make sure that the hydraulic system is connected to the correct hydraulic hoses.
While wearing safety gloves, check that there is no oil leakage from the pipes, fittings or cylinders.
Always replace the hydraulic hoses at least every 3 years.
This check can be carried out by the user.
9. Check bolts and screws
Check that all screws and hydraulic connections are properly tightened. In case of damage or loose
bolts/screws, replace them.
Can be carried out by the user.
10. Lubrication
Lubricate the grease fittings after the first operation (8 hours). Repeat every week after 40 hours of
operation.
Use REF 165TA3769 or REF 141TA3234 lithium grease to lubricate the equipment.
Can be carried out by the user.