14/28
5.
ASSEMBLY AND INSTALLATION
5.1.
Packing list
Description
Amount
Reference
CH or CHQ bale gripper
1
See annex 10.3
Operating manual
1
168TA7601
5.2.
Safety instructions for assembly and installation of the product
• Wear safety gloves and safety shoes when assembling the bale gripper.
• The assembly and installation must be carried out by an expert.
• Make sure that the goods and packaging are in good condition.
• Before commissioning, carry out a risk analysis on the assembly of the CAM attachment on
the forklift.
• Before using the bale gripper, carefully read the instructions in the manual of your lifting
device
5.3.
Assembly of the product
• Before installing the equipment, a thorough visual check must be carried out to make sure
that no damage occurred during the transportation and handling stage.
• If one or more components are damaged, it is necessary to notify CAM attachments and
agree on the measures to be taken.
• Provide enough space for the hydraulic connection to move freely and prevent blockage.
1. Remove the packing materials carefully
2. Place the bale gripper on a flat surface.
3. Strap and lift the bale gripper as indicated in the figure.
Check the type plate to know the weight of the bale gripper. Select the appropriate material
according to the weight (ropes, cables, etc.)
Lift the bale gripper with a crane. Only use a crane with sufficient capacity and secure the bale
gripper to the crane, so that it can be lifted safely.
4. Lift the bale gripper by lifting the plate of the pallet truck and place the locks for locking the bale
gripper on the pallet truck.
5. Connect the required hydraulics.