secret
▲
All rights reserved.No spreading abroad without permission of Caltta.
35
This option allows users to set the UDP port to upgrade the repeater remotely.
Remote Data Writing/Reading UDP Port
This option allows users to set the UDP port for the remote data writing/reading.
Network Management Parameter
Network Management IP
This option allows users to set the IP address of the Network Management.
UDP Port
This option allows users to set the UDP port of the Network Management.
TCP Port
This option allows users to set the TCP port of the Network Management.
6.1.8 Conventional Setting-Network- Local Access Management
This table allows users to set the ID range of the source terminal that is allowed to
access the repeater and send calls via the repeater. The repeater only retransmits the
calls when ID of the source terminal is within the ID range preset via Access Manger.
6.1.9 Conventional Setting-Network-Multisite Access Management
This table allows users to set the ID range of the target terminal that is allowed to
access the repeater in IP Multi-site Network. The repeater only retransmits the calls when
ID of the target terminal is within the ID range preset via Access Manger.
6.1.10 Conventional
Setting-Network-Application
Programming
Interface
AIS Enable
This option allows users to enable or disable the AIS feature. With AIS enabled, the
dispatcher server based on AIS standard is able to communicate smoothly with the
repeater.
Server IP
This option allows users to set the IP address of the dispatcher server.
Password
