secret
▲
All rights reserved.No spreading abroad without permission of Caltta.
32
This option allows users to set the TX power level for the current channel.
TX CTCSS/CDCSS Type
This option allows users to set the CTCSS/CDCSS type for the current channel.
TX CTCSS Frequency[Hz]
This option allows users to set the TX CTCSS frequency for the current channel. The
CTCSS frequency is the signaling that is loaded in the carrier and is lower than the audio
frequency. Range: 67.0~254.1hz.
TX CDCSS Code
This option allows users to set the TX CDCSS code for the current channel. The
CDCSS code is the signaling that is transmitted at the speed of 134.4 bit/s in the carrier
and is lower than the audio frequency.When TX CTCSS/CDCSS Type is set to CDCSS,
Range:D023N~D754N.When TX CTCSS/CDCSS Type is set to CDCSS Invert,
Range:D023I~D754I.
Tx Time-out Time[s]
This option allows users to set the transmission time-out time for the current channel.
Range:15~600s or Infinite.
6.1.5 Conventional Setting-Multi CTC/CDC
This table allows users to define up to 16 pairs of CTCSS/CDCSS. When this table is
associated with a certain channel, the CTCSS/CDCSS conditions must be satisfied for the
repeater.
6.1.6 Conventional Setting-Contact
Batch Add
Adds batch of members to the contact list, a maximum of 100 members can be
added.
Add
Adds new members to the contact list.
Insert
Inserts a new member to the specified position in the contact list.
Delete
Deletes the specified member from the contact list.
