secret
▲
All rights reserved.No spreading abroad without permission of Caltta.
34
This option allows users to set the operation mode for the repeater.
Master Domain Name On/Off
This option allows users to set whether to enable the DNS feature of the salve in IP
Multi-site Connect services. Through the DNS server, the slave can obtain the IP address
of the master through the master’s domain names. Thus, dynamic IP address is allowed
for the master, which is effective in lowering IP Multi-site Connect costs.
Jitter Buffer Length
This option allows users to set the length of buffer area for the repeater to process the
received voice and data in the IP network. When the network connectivity is poor, the
buffer length can be increased to improve the communication continuity. Range:1~16.
IP Multi-site Connect Periodical Heartbeat[s]
This option allows users to set the periodical heartbeat between the master and the
slave. Range:6~60.
Master IP
This option allows users to set the IP address of the master.
Master UDP Port
This option allows users to set the UDP port of the master.
IP Multi-site Connect UDP Port
This option allows users to set the UDP port of the slave.
IP Multi-site Connect RTP Port(slot 1)
This option allows users to set the RTP port for the slave to transmit voice service via
slot 1.
IP Multi-site Connect RTP Port(slot 2)
This option allows users to set the RTP port for the slave to transmit vocie via slot 2.
Network Authentication Key
This option allows users to set the authentication key used for accessing IP network.
All slave repeaters within the same IP site must share the same key as the master.
Master Domain Name
This option allows users to set the domain name of the master.Through the DNS
server, the slave in the IP Multi-site Network can resolve this domain name to the
corresponding IP address of the master, even though this IP address may change.
Remote Upgrade/Data Writing
Remote Upgrade UDP Port
