Caltech Calaer 2 kW, Installation Manual

Page: 42 / 60

12. Fuel system
40
Cut the fuel lines to length with a sharp knife, clean the interfaces from
burrs and make sure they are not crushed.
Connect the fuel lines to the standpipe, fuel pump and heater with the
rubber tubes and hose clamps provided with the unit. When mounting the
fuel lines, always connect them with a putt joint in order to prevent air
pockets in the fuel system.
Caution!

The fuel line between the fuel pick-up point, fuel pump and the
heater should be on a continuous rise.

Avoid routing the fuel line through cabins and other populated
rooms.