Caltech Calaer 2 kW, Installation Manual

Page: 9 / 60

4.Statuatory regulations
7
4. Statutory regulations
Country specific regulations shall be followed in all installations.
4.1 Directive 2001 / 56 /EU of the European Parliament and the
Council
The installation must comply with the requirements from Directive 2001 /
56 /EU of the European Parliament and the Council
Installation of the heater unit

Body sections and any other components in the vicinity of the heater
must be protected from excessive heat and the possibility of fuel or oil
contamination.

Every reasonable precaution should be taken in positioning the heater
to minimize the risk of injury and damage to personal property.
Combustion air intake

The air for the combustion chamber of the heater must not be drawn
from the passenger compartment. Combustion air must be taken from
the atmosphere or from a well ventilated compartment to guarantee
the safety of the passengers.

The combustion air inlet must be so positioned or guarded that blocking
by rubbish or luggage is unlikely.
Heating air intake

The heating air supply may be fresh or recirculated air and must be
drawn from a clean area not likely to be contaminated by exhaust
fumes emitted either by the propulsion engine, the combustion heater
or any other source.

The inlet duct must be protected by the mesh which is delivered with
the heater unit to prevent damage to the combustion fan.