UV SENSOR FAILURE:
Assuming the system has a UV Sensor installed, if at
any time during the operation of the system, a UV sensor fails, the controller
will return a “FAIL” indicator on the bottom LED screen and a constant audible
buzzer will sound during sensor failure.
CALULTRA Options
Although features such as remote monitoring and 4-‐20 mA output are built into the controller, their
output requires optional cables as shown below. Each cable and mating connector are unique in regards
to their size, so there is no chance of installing the wrong cable in the wrong connector.
The following optional cables are available for use on your CALULTRA systems. Contact your authorized
distributor for purchasing information.
4-‐20ma Cable:
Includes connector and 10m (33’) of cable
to provide a 4-‐20 mA signal to a remote location.
Remote Monitoring Cable:
Includes connector and 10m
(33’) of cable to remotely control a dry contact signal. Can be used for
dry contacts and/or 4-‐20 mA output.
Ethernet Module:
Allows for all controller functions to be connected to a computer via an Ethernet
cable. This module is currently in development and is not available at this point-‐in-‐time. Please contact
for more details.
4-20 mA port
(for 210011 cable)
UV Sensor port
remote monitoring (dry contacts)
(for 210010 cable)
Page
17
Summary of Contents for CALULTRA 132
Page 22: ...Page 22 ...
Page 23: ...Page 23 ...
