21
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
.
Note:
The holes of the bracket are designed to accommodate a #8 screw (not
provided). Depending on the material you are attaching to, use a screw of sufficient
length and strength to support the GigaSpire once attached to the bracket.
Note:
If attaching to sheet rock or gypsum board, Calix recommends using a wall
anchoring system to ensure the bracket is securely attached to the wall.
Wall Mount Screw Requirements
7 mm
.28 in
20 mm
.79 in
8317
2.6 mm
.1 in
3.75 mm
.15 in
#2
Depth
3.
Drill holes in the wall and attach the bracket using two #8 screws.
4.
Thread the GigaSpire on to the bracket using the captive M6 screw on the bracket.
5.
Attach Ethernet cable(s) to the GigaSpire and route them to the upstream/downstream
devices.
6.
Attach the power supply wiring to the GigaSpire and route to the power source.
7.
Secure all wiring conforming to local code.
GigaSpire BLAST Connections
6809
AC Power to UPS
110/220 VAC, 3 Prong
Ethernet
Data
Signal/Power Wiring
(12 VDC)
POTS
UPS
8218
GigaSpire BLAST
u12, u12x, u6.2, u6.1
Gigabit LAN
Ethernet, RJ45 (x4)
USB 2.0
POTS - RJ11 (x2)
2.5G Gigabit WAN - RJ45 (u12x, u6.2)
1.0G Gigabit WAN - RJ45 (u12, u6.1)
2-pin Power Plug (For
deployments without UPS)
8-pin Power Adapter
with Alarm Telemetry
for UPS deployments
Wi-Fi Protected Set-up (WPS)
Power Supply Connections
To upstream router
Summary of Contents for GigaSpire BLAST u12
Page 1: ...GigaSpire BLAST u6 u12 Installation Guide November 2021 220 01209 11 ...
Page 2: ......
Page 24: ...24 Proprietary Information Not for use or disclosure except by written agreement with Calix ...
Page 38: ...38 Proprietary Information Not for use or disclosure except by written agreement with Calix ...
