13
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
.
GigaSpire BLAST
u12
/BLAST
u12X
Tension d’entrée : 12 V CC (nominale)
10 V CC (min.), 15 V CC (max)
Adaptateur d’alimentation externe : 12 V CC, 4,5 à 5 A
GigaSpire BLAST
u6.1
/BLAST
u6.2
Input voltage: 12 VDC (nominal)
10 VDC (min.), 15 VDC (max)
External Power Adapter: 12 VDC, 3A
GigaSpire BLASTu6.1/BLASTu6.2
Tension d’entrée : 12 VCC (nominale)
10 VCC (min.), 15 VCC (max)
Adaptateur d’alimentation externe : 12 V CC, 3A
DANGER!
Using non-approved or incorrect power adapters can result in injury.
Site Preparation
Before you install any GigaSpire, you need to consider the routing of the power adapter cord
and Ethernet cable (if used).
Note:
It is critical that you maintain the proper airflow in and
around the unit. GigaSpire devices are designed for surface mounting only. Do not install
cabinetry or other building material around the outside of the unit.
Power Cords
In order to complete the installation, a power cord in one of two configurations is required:
GigaSpire Connectorized Power and Signal Cable - A 2-pin barrel connector to the local
AC power receptacle (Type A).
GigaSpire 8-pin connectorized power and signal cable - for use with the optional
Universal Power Supply (UPS).
Summary of Contents for GigaSpire BLAST u12
Page 1: ...GigaSpire BLAST u6 u12 Installation Guide November 2021 220 01209 11 ...
Page 2: ......
Page 24: ...24 Proprietary Information Not for use or disclosure except by written agreement with Calix ...
Page 38: ...38 Proprietary Information Not for use or disclosure except by written agreement with Calix ...
