14
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
.
Before you Begin
Before starting the installation process, check that the following conditions are met:
Ensure the site preparation steps are complete based on the model being installed.
Ensure that all components are on-site and readily available to complete the installation.
The customer is aware of your planned visit and will provide access to the inside of the
home.
Introduction
This document describes the installation of the following:
GigaSpire BLAST u6.2
GigaSpire BLAST u6.1
GigaSpire BLAST u6.x
GigaSpire BLAST u12
GigaSpire BLAST u12x
All BLAST units above are designed to be placed in a horizontal table-top configuration or
can be wall mounted using the optional wall mount bracket.
Powering Options
By attaching to any 110/220 VAC power outlet using the supplied 12 VDC wall
transformer.
For the BLAST u6.1, u6.2, and u6.x a UPS may be used. In this configuration, UPS
with alarm telemetry and an 8-pin connector on the GigaSpire attaches to an 8-pin
connector on the UPS.
Note:
For all models, the power cord configuration must be appropriate for use in the
country where the device is being deployed.
Note:
Only Calix provided and approved power cords or voltage adapters should be
used to connect to this product(s).
Summary of Contents for GigaSpire BLAST u12
Page 1: ...GigaSpire BLAST u6 u12 Installation Guide November 2021 220 01209 11 ...
Page 2: ......
Page 24: ...24 Proprietary Information Not for use or disclosure except by written agreement with Calix ...
Page 38: ...38 Proprietary Information Not for use or disclosure except by written agreement with Calix ...
