31
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
6.
Plug in the green SC/APC connector into the board as shown. Make sure the connector
is seated and secure.
7.
Connect the RJ-11 phone jacks to the four ports provided on the MEM. The label
affixed to the inside cover details the location of the phone jacks.
Power Cord
Connection
3332
Installing Expansion Modules
To install expansion modules
1.
Refer to the appropriate installation instruction supplied with each specific expansion
module.
Connect to Subscriber Services
Refer to the figures below for the following steps.
Important:
Individual voice, video and data wiring must exit the ONT from the bottom.
1.
Locate the telephone, video and data cables coming from the subscriber.
© 2001-2007 Calix. All Rights Reserved.
