RMD
WIRING DIAGRAM
The active DAB+ antenna is powered through
the core of the antenne wire (+5V).
No need to connect a seperate power source.
Male SMA
Attach to the metal of
the car frame.
Please note!
It’s not necessary to
remove any paint!
Remove the cover of the A-post
Place the antenna on the windshield near the 'A post'
Stick the transparant part of the
antenna on the windshield and put the
black part on the metal frame.
DAB
ANTENNA INSTALLATION
Microphone IN
(3,5mm jack)
Connector A
1. --
2. --
3. --
4. 12V (
yellow wire
)
5. 12V output (
blue wire
)
6. --
7. +12V ignition (
red wire
)
8. Ground (
black wire
) .
Connector B
1. Right rear speaker (+)
2. Right rear speaker (-)
3. Right front speaker (+)
4. Right front speaker (-)
5. Left front speaker (+)
6. Left front speaker (-)
7. Left rear speaker (+)
8. Left rear speaker (-)
FUSE 10A
White:
Front Left CH RCA ouput
Red:
Front Right CH RCA ouput
Red:
Rear Right CH RCA ouput
White:
Rear Left CH RCA ouput
