MCD901
Picture 5
(2). VCD DiSC
Open the TFT screen, and put the disc slightly into the disc entry. The disc is sucked intothe device automatically, then, the TFT
screen is drawn up to the proper position for the normal play. The disc is read thereafter, and the screen shows the catalogue menu
of VCD disc, you can select the options in the menu to play, to select the languages and the audio.
Touch section A on the touch screen when you are playing the disc to return to the main interface, and touch section D to pop
out the control menu.
Picture 6
1. Repeat (Click to switch between Chapter Repeat and Off)
2. Audio track switching key (Left track, Right track, Mix track, and
Stereo are available for the VCD play)
3. PBC function key
For other operation of VCD play, please refer to the above operation
of DVD disc play.
Only VCD2.0 disc has the PBC function.
You can enable/disable PBC function by using the MENU key on the
remote control.
(3). goto SearCh
When playing DVD or VCD disc, you can play the appointed section of the disc with the GOTO SEARCH function.
Touch section F on the right bottom of the touch screen, or press GOTO key on the remote control to enter the GOTO SEARCH,
and the screen is shown as picture 10.
Click the place where the cursor is located on the touch screen and input the number using the number keyboard; then, press OK.
The system will then play the appointed section of the disc.
(4).CD/Mp3/wMa DiSC
Picture7
Open the TFT screen, and put the disc slightly into the disc entry. The disc is
sucked into the device automatically, then, the TFT screen is drawn up to the
proper position for the normal play. The disc is read thereafter, and CD/MP3
play interface appears. You select the music directly from the interface, or input
the number by clicking the number keyboard on the right side of the screen to
play.
1. Mode switching key: Click to return to main interface.
2. Bluetooth icon
3. Playing time
4. Exit: Click to return to the current play interface.
5. Menu
6. Click to view the play information
7. EQ: Click to enter the EQ setup interface.
8. Play/Pause
9. Stop(Click to stop in the state of Breakpoint Memory;
double click to stop completely); long press for above 2
seconds to switch to OPEN mode, then, the disc is ejected
automatically.
10. Click to play the previous chapter
11. Click to play the next chapter
12. Fast backwards (Click to switch among the speed of x2,
x4,x8, and x16)
13. Fast forwards (Click to switch among the speed of x2,
x4,x8, and x16)
14. Video zoom in: There are three grades of zoom
15. Page up/down (Click to turn to page 1 if the current page is
page 2, see Picture 5)
16. Repeat (Click to switch among Chapter Repeat, Title
Repeat, and Off)
17. Section repeat (First click to select the start point A and
click again to select the end point, then, the system will
repeat playing between point A and B. Click again to disable
this function)
18. Audio switching key (Click to switch among different
languages and audio. This key is invalid if the DVD disc has
only one audio track)
19. Subtitle switching key (If the DVD disc contains many
kinds of subtitles, you can switch the subtitle of different
languages by clicking this key when playing)
20. Root
21. Title
22. Angle switching key
23. Page up/down (Click to turn to page 2 if the current page is
page 1, see Picture5)
