Caliber HCD 301I, Manual

Page: 10 / 12

Symptom Possible problem Solution
The main unit does
not respond (no
power)
AC cord is not plugged into
a wall outlet.
Plug the AC cord into a wall outlet.
Wall outlet is not
functioning.
Plug another device into the same outlet to confirm the
outlet is working.
iPad/iPod/iPhone
does not respond to
the unit
iPad/iPod/iPhone is not
installed properly.
Remove your iPad/iPod/iPhone from the dock and
check for any obstruction on the connectors in the
docking and on your iPod. Then reseat it in the dock.
Your iPad/iPod/iPhone is
locked up.
Please make sure that your iPad/iPod/iPhone is
working properly before docking into the unit.
iPad/iPod/iPhone
does not charge up
iPad/iPod/iPhone is not
installed properly.
Remove your iPad/iPod/iPhone from the dock and
check for any obstruction on the connectors in the
docking and on your iPod. Then reseat it in the dock.
iPad/iPod/iPhone battery
has problem.
Please make sure your iPad/iPod/iPhone is working
properly before docking into the unit.
Sound is distorted
Sound source is distorted.
If the source is iPad/iPod/iPhone, try to check the
sound at personal computer before putting into the
iPad/iPod/iPhone. If you are using an external sound
source like digital audio player, try reducing the output
volume on the device itself.
Volume level is set too high. Decrease the volume.
Radio inferference
Too close to a radio tower.
Move your speakers to see if the interference goes
away.
You may be able to purchase a shielded cable at your
local electronics store.
External source
(AUX-in) is not
responding.
3.5mm audio cable is not
Connected properly.
Check the connection and make sure the
cable is inserted firmly into the jack.
SPECIFICATIONS:
Power Supply: Input AC 100-240V~60/50Hz
Output Power: 1.5x2W (RMS)
Back up Battery: 2x 1.5V “AAA” (UM-4) Batteries
FM tuner: 87.5-108MHz
Dimension: 260mm(W) X160mm(D) X100(H)
Net Weight: 0.816kgs
The specification and external appearance of the set are subjected to change without
prior notice.