Caliber HCD 301I, Manual

Page: 8 / 12

iPod/iPhone/USB/SD is detected), the buzzer will sound instead.
-if the unit is power off, the alarm will sound in Buzzer mode.
-If the alarm sound in Buzzer, the sound will last 10 Minutes as Alarm. If the alarm sound in
Radio/iPod/USB/SD, the sound will last 1 hours.
Arming and Disarming Alarm (Turn Alarm Function On and Off)
To arm the alarm or to disarm the alarm, just press OFF/ON AL1 or OFF/ON AL2 button as needed
during power on and off mode.
If the alarm is armed, the alarm icon will flash on the display.
If the alarm is disarmed, the alarm icon will stop flashing.
Resetting the Alarm to Come on the Next Day
When the alarm is
activated (waking you)
, Press the OFF/ON AL1 or OFF/OB AL2 Button to stop
alarm and reset it to come on the following day at the same time.
Sleep Timer Setup
-While listening to Radio/iPod/USB/SD/AUX, press and hold Sleep button until “sleep”
icon start to flash, press Sleep button to adjust the sleep timer from
“90/80/70/60/50/40/30/20/10/00”minutes. After adjusted the sleep timer, just wait
the ”sleep” icon stop flash to confirm setting.
-when the sleep timer is active, press and hold sleep button to show the current sleep time,
press again to adjust it again to modify the setting.
Note: Press the sleep button until “00” is flashing to cancel the sleep mode, the sleep icon
“SLEEP” disappears simultaneously.
SNOOZE Operation
-Press to select LCD backlight Bright/DIM LEVEN1/DIM LEVEL2/ OFF
-When the alarm is activated (waking you), pressing the SNOOZE button will stop the
alarm one time. The Alarm icon will flash simultaneously on the display and enter into
Snooze status.The alarm will sound again after 9 minutes (default nap time)
Listening to FM Radio
Setting up the Antenna
Extend the wire antenna fully for best reception. Do not strip, alter or attach to other antennas.
Tuning and Playing the Radio
1. Press the Button to turn on the unit.
2. Press MODE button on the main unit until RADIO icon appears on the display to enter
Radio mode.
3. Press / button to search backward or forward radio station and stop
automatically.
4. Press and hold
/ button for searching radio frequency backward or forward
and store the station automatically.
Notes:
-The unit can store up 50 FM stations automatically for easy recall at any time.