Caliber HCD 301I, Manual, Page: 7 / 12

Alarm Setup
1.
Press the “ALARM” button during power off mode to access time setup.
2. Press Alarm Button until “ ” icon flash then press or button to select
wake to sound source circularly (the Alarm1 and relevant alert icon:
from radio, iPod, USB, Card to Buzzer with Alarm1 appeared.
3.Press the Alarm Button until alarm hour digit flashes on the display. Press or
Button to adjust the hour, press ALARM to confirm the hour. The hour digit stop
flashing and the minute digit start to flash.
4.Press
or button again to adjust the minute, then press ALARM button to
confirm the minute and the week words start to flash.
5. Press
or button again to adjust the week, then press ALARM button to
confirm the week. (There are three modes can be alarmed on the week:
1) Sunday Monday Tuesday Wednesday Thursday Friday Saturday
2) Sunday and Saturday
3) Monday Tuesday Wednesday Thursday Friday.)
After selected the alert mode, the alarm1 will be armed automatically, indicated by the
alarm1 icon.
6.The setting of Alarm2 refers to above steps 1 ~ 5.
Nap Setup
1. During power off mode, press the “ALARM” button thrice until the display show
flashing “NAP” to access NAP setup.
2. Press or button to select wake to sound source circularly (alert icon:
from radio, iPod, USB, Card to Buzzer appeared.
3. Press the Alarm Button until alarm hour digit flashes on the display. Press or
Button to adjust the hour, press ALARM to confirm the hour. The hour digit stop
flashing and the minute digit start to flash.
4. Press
or button again to adjust the minute, then press ALARM button to
confirm the minute.
The Nap alarm set will be active only one day. In Nap Alarm mode, it can not select the
week in Nap alarm.
Note:
- You cannot wake to aux audio device.
·If the radio alarm mode is selected, the alarm will turn on and broadcast the last channel before turning
off the unit.
·If the iPod alarm mode is selected, the alarm will turn on and play the last track played previously.
·If the iPod alarm mode is selected but the iPod or iPhone is absent, it will switch to Buzzer alarm mode
automatically. The Buzzer sound will be getting louder and louder gradually.
·If selected wake to iPod, your iPod/iPhone must be properly docked and off.
·If the USB or SD mode is selected but the USB or SD is absent, it will also switch to Buzzer alarm mode
automatically. The Buzzer sound will be getting louder and louder gradually.
- If iPod/iPhone or USB/SD alarm sounds and the docking station or USB/SD detects no sound (or if no