Caliber HCD 301I, Manual, Page: 6 / 12

WARNING: Do not apply power to the unit until all of your connections are made. Please
turn off your iPod/iPhone before docking. Check your iPod/iPhone manual for the proper
procedure to turn your model off.
1. Insert the AC cord into AC wall outlet.
2. The display is ON and showing the time.
4. Press the Play button to turn on the unit.
5. Remove the AC cord out of the wall outlet if you want to switch off the main voltage
completely.
BASIC OPERATION
1. Turn on the unit by pressing the Play/Pause button on the unit. Press and hold this
button to turn the unit off.
2. Press the MODE button on the main unit to select different play modes:
RADIO/IPOD/USB/SD/AUX-IN
3. The volume of the unit can be controlled by pressing the volume button on the main
unit.
4. Press Snooze button on the main unit to adjust the lightness of LCD display by:
Bright/DIM Level 1/DIM Level 2/OFF
SETUP AND OPERATIONS
Clock Setup
Setting the Time by using iPhone/iPod Time Sync
Time sync mode allows you to sync the docking station to the time from your iPhone or recent models of
iPod like iPod Touch, iPod Nano and iPod Classic (older models such as iPod Mini do not support this
feature).
1. Make sure your iPhone or iPod is properly docked. The sync function is in progress automatically.
2. After sync is complete, the display will show the current time on your iPhone/iPod clock.
NOTE : The iPhone is constantly updated to current time via cell phone towers. The time on your iPod is
only accurate to the last time it was synced to a computer. It’s possible to have up to 59 seconds
difference between the docking station and synced iPhone/iPod.
Setting the Time Manually
1. Press the “TIME” button during power off mode to access time setup, the hour digit
will flash.
2. Press or button to adjust the hour, then press TIME button to confirm the
hour. The hour digit will stop flashing and the minute digit will start to flash.
3. Press or button again to adjust the minute, then press TIME button to
confirm the minute. The minute digit will stop flashing and the week digit will start to
flash.
4. Press or button again to adjust the week, then press TIME button to confirm
the week.