11.14 - RESTORE (RESET)
•
The operation may be carried out following the path
Menu key ->
:
CONFIGUR Set ->
using keys
select item
confirm with
.
RESTORE SEt
OK
The display will ask to choose between restore
and
.
«YES»
«NO»
•
Use the
keys, to select then press
to confirm.
OK
11 - CONFIGURATION MENU (installer)
IMPORTANT! The RESTORE (Reset) operation is recommended for the
installer or expert user. In fact, this operation deletes many previous
settings and programs carried out also according to the type of system.
11.15 - SYSTEM SOFTWARE INFORMATION
•
If you opt for
the display exits the function and goes back to the initial
NO
RESTORE SEt
screen. Press the
key to exit.
back
81
The RESTORE operation deletes any user and/or installer password entered.
EN
OK
OK
OK
Menù
back
SetT
OK
Menù
back
SetT
OK
This information is useful in the event of request for technical support.
Following the path
>, using the keys
display the
key
->
-
Menu
CONFIG SEt
INFO SW
entry to obtain informations about the installed firmware.
Press the
key to return to the previous menu or press
to exit the menu.
back
OK
•
If you confirm
will be displayed for 3 seconds, then the system will
YES «RESTORE»
restart and display the language screen.
•
Use the
keys to select the desired language. Confirm by pressing
OK.
•
To make the programmable thermostat operational
displaying the normal operation
screen, it is mandatory to set or confirm: current date, hour, minutes, daylight saving
time/standard time change (see complete procedure in par. 11.4).
important:
the programmable thermostat restores many factory settings (default) with the
exception of some special items that use the last set value (see summary table in chapter 2).
Example:
Set
0
2
4
6
8
10
12
14
16
18
20
22
OK
Firmware revision
Firmware version
OK