5 - INSTALLAZIONE
After having made the electrical connections:
!
Apply the terminal cover to the base, securing it to hook .
E
!
To remove the cover, use a small screwdriver on hook for leverage.
E
Hook the timer thermostat to the wall base in teeth .
C
Then turn the body of the programmable thermostat downwards
until it is secured in slot (CLICK indicating the correct fixing).
D
1°
3°
2°
5 - INSTALLATION
5.5 - PROCEDURE TO FASTEN OR REMOVE THE PROGRAMMABLE THERMOSTAT FROM THE WALL BASE
E
C
D
C
Unhook the
thermostat from the wall
programmable
base, using a screwdriver in the specific slot ( ) in the
D
lower part of the device for leverage, then remove it.
Disconnect the 230V~ mains voltage
ATTENTION!
Removing the programmable
thermostat from the wall base
52
EN
D