Caledonian Audio
Phono Classique Assembly Manual
27
27
Figure 21 - Main transformer
3.6 Ground Lift (Isolator) Circuit (Not Included)
Some extra space (see the dotted area in Figure 12) and a drill hole have been
prepared to accommodate a simple ground lift circuit. The space is large
enough to secure a 35A bridge rectifier, a capacitor and a 5W resistor.
However, the circuit is out of the scope of this product and may or may not be
permitted depending on your local regulations – so please check. If nothing is
used on this space, the drill hole on the mounting board can be filled with a
simple screw and nut.
3.7 Ground Lug
Following the tradition of all phono preamp, we will provide a ground lug as an
earth reference so that turntable’s earth/ground line can be connected.
For this purpose, we will use a standard banana socket
[T-1]
(commonly used
for wiring speaker cables). This connecter, (which is electrically insulated to the
mounting plate) will also double up as our star ground at a later stage. A number
of crimp ring terminals
[FIX-10]
are included to ease the wiring.
Attach the banana socket onto the mounting plate.
You should now have all the components mounted onto the plate.
Summary of Contents for Phono Classique
