Sauna Owner’s Manual
Preparing for Your New Sauna
ELECTRICAL INSTALLATION OF YOUR SAUNA AFTER DELIVERY
Important Safety Notice For All Models
1. For the IR-100 Infrared and IR-200 Infrared models, locate the junction box (located under
neath the bench; this can be accessed by removing the front skirt of the bench). Make sure
that all the connections are seated securely in the junction box.
2. Access the sauna’s power terminal strip.
3. Plug the unit in.
Preparing a Good Foundation
Your sauna needs a solid and level foundation. The area that it sits on must be able to support
the weight of the sauna and the occupants who use it. If the foundation is inadequate, it may
shift or settle after the sauna is in place, causing stress that could alter the structures seal.
NOTE:
Damage caused by inadequate or improper foundation support is not covered by the
warranty. It is the responsibility of the sauna owner to provide a proper foundation for the
sauna.
Place the sauna on an elevated foundation (preferrably a 3” concrete slab). If you are installing
the sauna indoors, pay close attention to the flooring beneath it. Choose flooring that won’t be
spoiled or stained.
Below are the recommended foundation sizes for your sauna (outdoor models only)
Sauna
Actual Size
Recommended Size
OD-100 Sauna
4’ x 6’
5.5’ x 7.5’
OD-200 Sauna
5’ x 8’
6.5’ x 9.5’
If you are installing your sauna on an elevated wood deck or other structure, it is highly
recommended that you consult a structural engineer or contractor to ensure the structure will
support the weight. We strongly recommend that a qualified, licensed contractor prepare the
foundation for your sauna.
Your Cal Heat Retailer Can Help You With Foundation And More
Your retailer has a wealth of information and experience about how to get the most out of your
sauna. Your sauna retailer also has a full line of accessories that are engineered to complement
your sauna.
Check the Dimensions of Your Sauna
The Size Specifications chart for your sauna is listed below. Compare the dimensions to the
width of gates, sidewalks, doorways, hallways, etc. along the delivery route that will be used
when building your sauna in the desired location. It may be necessary for you to remove some
items in order to provide an unobstructed passageway to the installation location.
Page 4
LTR20071007, Rev. A
Summary of Contents for Cal Heat CU-100
